NIDOKING - Pokémon Papercraft

Nidoking swing its large tail about to create distance, then charges in with the full force of its body behind it. One swing of its mighty tail can snap a telephone pole as if it were nothing but a matchstick. 

 

Download

NIDOKING - Pokémon Papercraft

Unicorn Gundam Papercraft (Arms)

New parts for Unicorn Gundam. This parts are arms parts, consist of 4 letter pages. I use new type of joints for this unicorn fingers, flat joints. Instructions are for left hand only, the right one use the same numbers but the parts are mirrored. There will be 3 parts to go, legs, back booster - backpack, and accessories such as weapons and shield.

Download

Unicorn Gundam Papercraft (Arms)

Drifblim - Pokémon Papercraft

Drifblim seems to be a living hot air balloon, and can be used for transportation, having the strength to lift people. Unfortunately, like a real hot-air balloon, it goes with the winds, and as such, one cannot control its trajectory. Drifblim is drowsy in daytime, but is carried aloft by the winds in the evening in big groups. When noticed, they suddenly vanish. It evolves from Drifloon starting at level 28. 

Download

Drifblim - Pokémon Papercraft

DRIFLOON - Pokémon Papercraft

It is said that Drifloon may be the ghosts of popped balloons, this "X" may be two pieces of tape intended to cover the hole that would have caused the balloon to deflate. A white mass of fluff sits on top of Drifloon's head. Drifloon usually try to grab children in attempts to spirit them away, but these attempts always end up with the Drifloon getting swung around. Being filled with air lets Drifloon either expand or shrink to express its feelings. It evolves into Drifblim starting at level 28.

Download
DRIFLOON - Pokémon Papercraft

Kamen Rider The First Helmet 1:1 Papercraft (Minus Eyes)

 

Kamen Rider THE FIRST (仮面ライダー THE FIRST, Kamen Raidā Za Fāsuto,  Masked Rider THE FIRST) is a 2005 Japanese tokusatsu film. The film is an adaptation of the television series Kamen Rider, though there are many differences between the film and the original programme; some of these, however, are due to a closer reliance on the original Kamen Rider manga by Shotaro Ishinomori. Written by Toshiki Inoue and directed by Takao Nagaishi, the film stars Masaya Kikawada as Takeshi Hongo/Kamen Rider 1 and Hassei Takano as Hayato Ichimonji/Kamen Rider 2.

Download
Kamen Rider The First Helmet 1:1 Papercraft (Minus Eyes)

Dissidia - Final Fantasy: Sephirot Papercraft

An awesome Sephirot papercraft by Wulingyi based on the action RPG/fighting game developed and published by Square Enix for the PSP.

 

Download

Dissidia - Final Fantasy: Sephirot Papercraft

 

Optimus Prime Part 5 (Final)

At last,part 5 is ready for download. This part is also marked the closing of optimus prime paper model project that has been last for 8 months? Don't forget to glue autobots logo at the end page of part 5. His leg consists of 122 pages of patterns. Good luck and have fun. Glue the joints for rigid construction.

Download

Optimus Prime Part 5 (Final)

CROCONAW - Pokémon Papercraft

Although Croconaw has been described as always having forty-eight fangs lining its mouth, only six are discernible, with only four visible when the mouth is closed. They possess an asymmetrical, yellow-colored pattern on their chests that somewhat resembles a spotted animal skin. Once it bites down on something, it won't let go until it loses its fangs. But new fangs grow back quickly. It evolves from Totodile starting at level 18 and evolves into Feraligatr starting at level 30.

 

Download

CROCONAW - Pokémon Papercraft

BLAZIKEN - Pokémon Papercraft

Blaziken is mostly red in coloration, with accentuations of beige, yellow, and gray. Blaziken appears to have long, beige-colored, hairlike feathers extending behind its head, continuing downward to envelop some of its chest and abdomen. Blaziken’s small, red-colored face is almost completely covered in feathers. It has a crest on its head with two points, which resembles the letter "V". Blaziken has three spiky extensions on the sides of its face, much like Gardevoir’s. Blaziken’s eyes are semicircular in shape, with yellow scleras and blue irises, and Blaziken's mouth is a hooked beak. The continuation of the "hair" from its head on its chest and abdomen makes Blaziken appear as if it's wearing a sleeveless jacket on its torso. Blaziken’s strong, muscular legs give it immense lower body strength, helping its kicking and jumping abilities. Blaziken has three fingers on each hand, resembling that of a normal chicken’s feet, with what appears to be gray-colored wristband-like markings on its wrists. Blaziken has spur-like claws on the underside of its upper leg, and, although rarely seen due to the shaggy feathers on the bottom of its legs, three clawed toes. It can leap over a skyscraper with a single jump. It can make flames spout from its wrists and ankles, cloaking its feet or fists. The stronger the foe it faces, the more intensely its flames burn. It may also launch a fiery kick at the opponent.

Download

BLAZIKEN - Pokémon Papercraft

Optimus Prime Part 3 (Arms)

Arms parts for Optimus prime paper model is ready for download. This part 3 consists of 39 pages of patterns. Left and right arms are symmetrical, the instructions initially for left one. Arms are moveable but only in limited angle range, fingers also moveable.

Download

Optimus Prime Part 3 (Arms)

Optimus Prime Part 4 (Waist)

This part is only consist of 13 pages of patterns, a quick burst before modeling OP last part which is part 5 or legs. Keep the spirit and thanks to you guys who follow this project this far, the credit is for Michael Bay and his team who design this awesome character in the first place, leader of the Autobots, Optimus Prime (Transformers 2007)

Downloal

Optimus Prime Part 4 (Waist)